bike.wikisort.org - Motorcycle

The Honda NX650 Dominator is a dual-sport motorcycle. It was manufactured by Honda from 1988 to 2003.

Honda NX650 Dominator

Manufacturer	Honda
Production	1988-2003
Successor	Honda XR650L
Class	Dual-sport
Engine	644 cc, single-cylinder, four-stroke engine
Compression ratio	8.3:1
Power	44.00 hp (32 kW) at 6000 rpm
Torque	39 lbf⋅ft (53 N⋅m) at 5000 rpm
Ignition type	Electric start
Transmission	5-speed manual, chain final drive
Brakes	Front: disc / Rear: disc
Tires	90/90-21 54S (front) 120/90-17 64S (rear)
Wheelbase	56.4 in (143.5 cm)
Dimensions	L: 86.4 in (219.5 cm) W: 35 in (89 cm) H: 48 in (122 cm)
Seat height	34.3in (87 cm)
Weight	335 lb (152 kg) (dry) 370 lb (168 kg) (wet)
Fuel capacity	3.4 US gal, of which 0.66 US gal reserve (13 litres, of which 2.5 L is reserve)
Fuel consumption	45 mpg (19 kpl)
Related	Honda XR600

Design

Its engine is slightly larger than that of the XR600R, which debuted in 1985. The 97 x 80 mm bore engine was enlarged to 100 mm and stroked to 82mm for 644cc. With 44 horsepower at 6,000 rpm, the engine had 53 N⋅m of torque at 5,000 rpm. A gear-driven counterbalancing system helps to smooth out vibrations created by the large single-cylinder engine. The compression ratio of 8.3:1 for the four valves is aided by a single chain-driven overhead camshaft. The intake is via a 40 mm Keihin constant-velocity carburettor, reaching as low as 5.2 L/100km (45 mpg) from 12.8 liters (3.4 gallons) in the tank. The bike features a dry-sump (frame carries oil supply) engine.

The Dominator has a dual exhaust located alongside the rear fender and its powertrain is a wet clutch powering a five-speed gearbox.

The non-adjustable fork has 41mm tubes and supplies 8.5 inches of travel; the rake is 28.5 degrees, and the trail is 4.5 inches. A fork brace is built into the underside of the fender. The front carries a 21-inch spoked wheel with a 90/90 tire. The motorcycle has a single front disc brake with a twin-piston caliper.

In the back, the single-shock setup allows for preload alterations, with rear-wheel travel at 7.5 inches. The rear carries a 17-inch spoked wheel with a 120/90 tire. The rear wheel features a disc brake. The footpegs have rubber inserts, intended to appeal to urban riders. If a rider was interested in more off-road use, the inserts could be punched out, leaving saw-toothed metal pegs, which are useful in precarious situations.

Sales

United States' sales of the NX650 were disappointing and it was withdrawn from the US market after only two years in 1990. The European version sold well and was marketed through 2003.[1][2]

Variants

Other variations of the NX650 included the NX125, NX150, NX200, NX250, NX350, NX400, and NX500.

References

External links

• Honda NX650 Dominator Review, Motorcycle Network. Retrieved 2021-06-19

На других языках

---

[de] Honda NX 650 Dominator

Die Honda NX 650 Dominator ist ein geländegängiges Motorrad des japanischen Fahrzeugherstellers Honda. Die Enduro wurde von 1988 bis 2000 unter den Werkscodes RD 02 und RD 08 gebaut. Die englische Verkaufsbezeichnung Dominator [.mw-parser-output .IPA a{text-decoration:none}dɒmɪneɪtəʳ] bedeutet Beherrscher.

---

- [en] Honda NX650 Dominator

---

[es] Honda Dominator

La Honda Dominator o Honda NX es un modelo de motocicleta trail que fue fabricado por la compañía Honda entre los años 1988 y 2002. La Dominator reemplazó a las Honda 600 XLM y XLRM.[1]

---

[fr] Honda NX 650 Dominator

Le Honda NX 650 Dominator est une moto de type trail monocylindre produite par Honda.

---

[it] Honda NX 650 Dominator

La Honda NX 650 Dominator (più comunemente conosciuta solo come Honda Dominator) è una motocicletta enduro-stradale dotata di un motore monocilindrico da 644 cm³ di cilindrata prodotta dal costruttore giapponese Honda tra il 1988 e il 2002. Dal 1994 la produzione viene spostata in Italia, nella sede di Atessa.

---

---