DH-8 (1998) |
Specs: Rear Wheel Travel: 8.0"
Notes: Rear linkage is a forerunner to the semi-parallel linkage of the DHExtreme-8.
|
DHExtreme-8 (1999), also known as 'DHE-8' |
Specs:
Effective top tube:
md/lg 21.0" sm/md 20.0"
Head Tube Diameter:
1.125"
Head Tube Length:
4.5"
Head Tube Angle:
69.0 degrees
Seat Tube Angle:
61.0 degrees
Seat Tube Diameter:
27.2 mm
Wheel Base:
45.0"
Chain Stays:
18.5"
Bottom Bracket Height:
15.0"
Bottom Bracket Width:
73 mm
Rear Wheel Travel:
8.0"
Suspension Type:
Semi Parallel Linkage
Notes: Hydro formed front triangle, heat treated 6061 T-6 Alcoa aluminum, Disk brake compatible only, universal standard disk brake mounts, recommended fork with minimum 180 mm travel. Single piece bottom bracket/ pivot juncture, needle bearings in all pivots, Igus bushings in smaller pivot area, standard 135 mm spacing for rear wheel. 12 mm Rear axle (supplied with frame), Adjustable wheelbase up to 1 inch. 14 Pieces total on precision CNC mill work. Integrated set screw to supply tension to drop out tabs. 1.0" Square tubing used in rear swing arm to keep the up sprung weight low. Motion Ratio 2.91 : 1 allows for better rear shock damping and less stress on the rear shock. Replaceable seat tower.
Cortina modified the DHE-8 for the Avalanche Downhill Racing 1999 team bikes. An Avalanche MTN-3 shock was fitted by replacing parts of the linkage with specially designed parts to accommodate the larger shock which gave the frame a total of 10" of travel (which although it is fairly common now, was unheard of in 1999). The large oil reservoir of the avalanche shock can be seen attached to the downtube. |
Europa-DS (2000), also known as 'Slalom', 'Europa', 'Europa-Dual' |
Specs: Effective Top Tube:
21.5"
Head Tube Diameter:
1.125"
Head Tube Length:
5.0"
Head Tube Angle:
70.0 degrees
Seat Tube Angle:
73.0 degrees
Seat Tube Diameter:
27.2 mm
Wheel Base:
n/a
Chain Stays:
16.5
Bottom Bracket Height:
13.0"
Bottom Bracket Width:
73 mm
Notes: 6061 T-6 Aluminium, oversized round tubing in the front triangle with a laser cut gusset bridging the head tube, down tube and top tube. 1.0 Square tubing in the rear with our trade mark "no yoke" tire clearance cut out. Precision CNC milled drop outs. Europa frames are disk brake compatible only, and have an adjustable wheelbase up to 1 inch, they use the same 12 mm trough axle technology as the DHExtreme-8 system. The frame uses the same measurements as the Europa with the exception of using the standard quick release (CNC) drop outs.
|
XCO (2000), also known as 'Cross-Country' |
Specs:
Effective Top Tube:
23.0"
Head Tube Diameter:
1.125"
Head Tube Length:
5.0"
Head Tube Angle:
71.0 degrees
Seat Tube Angle:
73.0 degrees
Seat Tube Diameter:
27.2 mm
Wheel Base:
42.0"
Chain Stays:
16.5
Bottom Bracket Height:
13.0"
Bottom Bracket Width:
73 mm
Frame Weight:
3.5 lb.
Notes: 6061 T-6 Aluminium, oversized round tubing in the front triangle. 1.0 Square tubing in the rear with our trade mark "no yoke" tire clearance cut out. Precision CNC milled drop outs. Cantilever brake mounts or disk brake mount options available (universal standard only) Standard 135 mm rear wheel spacing. Dual water bottle mounts.
|
Joyride (2001) |
Specs:
Effective Top Tube:
md/lg 23.0" sm/md 21.5"
Head Tube Diameter:
1.125"
Head Tube Length:
4.5"
Head Tube Angle:
71.0 degrees
Seat Tube Angle:
65.0 degrees
Seat Tube Diameter:
27.7 mm
Wheel Base:
43.0"
Chain Stays:
16.75"
Bottom Bracket Height:
14.0"
Bottom Bracket Width:
73 mm
Rear Wheel Travel:
4.0"
Suspension Type:
Independent live eyelet
Notes: Hydroformed front triangle, Disk brake compatible only, universal standard disk brake mounts, recommended fork with minimum 100 mm travel. single piece bottom bracket/ pivot juncture, needle bearings in rocker pivot, standard 135 mm spacing for rear wheel.
|
Europa-FS (2001), also known as 'Europa-DS' |
Specs: Rear Wheel Travel: 5.0"
Notes: None
|
Triton-DS (2001), also known as 'Cromoly Project', '4130 Slalom' |
Specs:
Effective Top Tube: 21.5"
Seat Tube: 16"
Bottom Bracket Width: 68 mm
Head Tube Angle: 69 degrees
Seat Tube Angle: 71 degrees
Weight: 5 lb
Notes: This frame is hugely popular due to its high durability, great geometry and low cost. Along with the Triton DH, this frame was the first to be manufactured in Mexico after Cortina Cycles USA was set up. The low manufacturing cost and ability to produce a larger quantity of frames in a factory proved to be a breakthrough for Cortina, with the frame reaching a worldwide market.
|
El Heffe BMX (2002) |
Specs: Unknown
Notes: None
|
Triton DH (2003) |
Specs: Rear Wheel Travel: 8.0"
Notes: The Triton DH showed an important move away from the complex linkage designs of the DHE-8, Joyride and Europa DS, and move towards a simpler and more durable design utilizing a one-piece rear triangle and 4130 Cromoly.
|